You may purchase this unit in one of 2 ways listed below.
1.) Refurbished by a factory trained service engineer.
• Everything in and on the unit is thoroughly cleaned, tested, and painted if needed.
• Complete manufacture specific Preventive Maintenance documentation.
• All required operating accessories.
• Ready for use in the laboratory.
• 90 day parts and technical support warranty.
• Installation, Training, and Service agreements are available to qualified customers.
• Crated/Packaged.
2.) Complete working at shutdown, thoroughly cleaned, packaged, and crated in a custom built international shipping crate.
***Please don't forget to ask about your multiple unit, reagent, and consumable discount.***
Siemens Dade Dimension Xpand Plus Integrated Chemistry System
The Dimension® Xpand Plus integrated chemistry system combines chemistry,
STAT and specialty testing on a single, compact, easy-to-use system.
Full-range integrated capability in a small footprint
True integration of chemistry and immunoassay for improved workflow
efficiency
Easy-to-use Dimension platform provides the confidence that every trained
operator can run any test, any time
Full disease-state profiling on a single analyzer
The most commonly ordered panels from a single sample
Features and Benefits
Full Range Integrated Capability for maximum efficiency in a compact space
"The Siemens ISD assays on the Dimension® Systems provide a number of
advantages, including decreased turnaround time—instead of batching samples,
which can take two or three hours to perform, we can run samples
(in random access) in about 30 minutes."
Raffick Bowen, MT(CSMLS), PhD, DCIChem, FCACB, DABCC
Stanford University Medical Center
Compact yet powerful
Comprehensive menu – over 90% of critical assays
47 assays onboard concurrently
True Integration
Simultaneous immunoassay and chemistry processing when used with
Heterogeneous Immunoassay module
One sample area
Common reagent area
User-friendly
No manual reagent or sample preparation
Load and go reagents without instrument pause
Low calibration frequency
Minimal maintenance
Built-in Automation
Auto rerun at lab-defined “panic” values
Lab-defined auto-dilution without operator involvement
Automatic reflex testing
Auto calibration for electrolytes
Sample level sense warns of low volumes prior to processing
Patented cuvette system automatically produces cuvettes for use and seals
them for disposal
Technical Specifications
Weight 765 lbs (348 kg) Basic
783 lbs (356 kg) with Heterogeneous Immunoassay (HM)
Module
Dimensions Width: 51” (129 cm)
Height: 45” (113 cm)
Depth: 31” (79 cm)
Operating
Temperature
65-85°F (17-30ºC) with a maximum fluctuation of 5ºF (2.8ºC)
per hour. The system requires a maximum of 120 minutes to
warm up from a cold start to the incubation temperature.
Relative
Humidity
20-80%
Avg Noise
Output
<70 dBA at 1 m while operating
Thermal
Output
3753 BTU/Hr (1100 W)
Water Usage Very low water consumption (2 liters/hour at maximum
throughput)
Power Requirements
Nominal Line
Voltage vac
115
230
Line Voltage
Range vac
103 to 127
207 to 253
Nominal Line
Frequency Hz
47 to 63
47 to 63
Maximum Continuous Current, AMPS ~11
~5.5
Power Consumption WATTS 1265
1265
Circuit : The instrument must have a separate,
Electromagnetic Radiation : Do not locate the instrument within
Receptacle : Customer must provide a Hospital
Recommended Service Outlet : 115 vac, 60Hz, Single Phase, 20A
Waste Requirements : Liquid Waste Output
Water Requirements : • Instrument feed water: must maintain
Wire Size (North America Only) : 10 AWG wire is required to minimize
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
12
